User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Fluke 80F-15:High Voltage Divider
DATE:                  17-Feb-95
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       5
NUMBER OF LINES:       60
CONFIGURATION:         Fluke 5700A
CONFIGURATION:         Datron 1281
STANDARD:              ESI SR1 10Mê
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R     N              P     U       M              F        W
  1.002  ASK+                                          X
  1.003  IEEE         [@1281]*RST
  1.004  STD          ESI SR1 10Mê
  1.005  HEAD         ÍÍ INITIAL CONDITIONS ÍÍ
  1.006  DISP         This procedure requires the use of the ESI 10Mê
  1.006  DISP         resistor, DTB# 18-59
  1.007  HEAD         {}
  1.008  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.009  HEAD         {º Divider Calibration º}
  1.010  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.011  HEAD         ÍÍ Divider Calibration ÍÍ
  1.012  JMP          2.001
  1.013  EVAL
  2.001  DISP         Connect the ESI standard resistor to the Datron DMM
  2.001  DISP         HI and LO INPUTS.
  2.002  DISP         Connect the divider box from the 80F-15 to the
  2.002  DISP         terminals of the Standard Resistor.
  2.003  DISP         Connect the probe tip from the UUT to the
  2.003  DISP         5700A HI OUTPUT.
  2.004  DISP         Connect the ground clip from the UUT to the
  2.004  DISP         LO OUTPUT from the 5700A.
  2.005  IEEE         [@1281]DCV AUTO
  2.006  5700         100V                                              S  2W
  2.007  ACC          1000           0.01%
  2.008  IEEE         [@1281][D5000]RDG?[I]
  2.009  MATH         MEM=100/MEM
  2.010  MEME
  2.011  MEMC         I              0.070%        100ÿVolts
  3.001  5700         500V                                              S  2W
  3.002  ACC          1000           0.01%
  3.003  IEEE         [@1281][D5000]RDG?[I]
  3.004  MATH         MEM=500/MEM
  3.005  MEME
  3.006  MEMC         I              0.070%        500ÿVolts
  4.001  5700         1kV                                               S  2W
  4.002  ACC          1000           0.01%
  4.003  IEEE         [@1281][D5000]RDG?[I]
  4.004  MATH         MEM=1000/MEM
  4.005  MEME
  4.006  MEMC         I              0.070%        1000ÿVolts
  5.001  HEAD         {}
  5.002  DISP         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  5.002  DISP         {º THIS COMPLETES THE VERIFICATION º}
  5.002  DISP         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  5.003  END